Ghost Immobiliser Installation

Install a ghost immobiliser on your car to safeguard it from thieves. Our TASSA confirmed system safeguards vehicles from hacking, key cloning, and immobiliser bypassing.

The system is hidden within the wiring loom of your vehicle so it's completely invisible to anyone looking. It is created by generating a pin code push sequence by using buttons already present on the steering wheel doors, door cards, and the centre console.

No circuit cuts

It's not a surprise that people are concerned about protecting the vehicle they have spent so much money to purchase. Traditional security devices, like alarms or wheel locks can be easily bypassed by thieves. Ghost immobilisers are a extremely effective solution that works in a quiet manner and isn't easily detected by modern thieves.

Ghost immobilisers are hidden device that connects to the CAN data network of your vehicle to shut down the engine without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU through existing buttons on the steering wheel, dash, and door panels to generate an individual pin code that only you can access. The code can be changed at any point and can be as long as 20 digits in length, based on your preference. It also has an emergency code that you could use in case you forget your PIN.

The ghost car immobiliser immobiliser can also be used to stop a relay box from transferring the signal of your car's key from inside your home, which could unlock the doors and start the vehicle. It could even block advanced methods of stealing your vehicle such as OBD port hacking. The device is small and weatherproof, so it's hard to spot and is even more difficult to interfere with.

The ghost immobiliser has another advantage: it can be inserted into your vehicle without leaving permanent marks. This makes it perfect for those who are planning to sell their car in the future. It's also much more efficient and less time-consuming to install than an original factory-fitted system.

The autowatch ghost installation [horton-mosley-2.federatedjournals.com] Ghost, a cutting-edge technology, is a new generation device that prevents thefts from cars that are not connected to the CAN network of a vehicle and using the buttons to generate a unique PIN code. This is a snoopy device that can be put in without cutting wires and doesn't require any additional key fobs. It can also be connected to the original ECU of the vehicle, which prevents thieves from using a different key. This system has been verified by TASSA and is able to be linked to an International Security Register. Owners will have peace of mind, knowing that their vehicles are protected from theft.

No scanning with RF

You'll want to safeguard your vehicle from theft if have spent an enormous amount of money and spent a lot of time customizing it. One way to do this is to install an immobiliser, which will stop the engine from starting until you enter a unique PIN code. Using the buttons on your steering wheel and dashboard, you can generate an up to 20 digits in length that is only known to you, and ensure that only you have access to your vehicle. You can also create a valet and service mode that will allow you temporarily to start your car without having to enter the PIN code. This will permit technicians to work on your vehicle, without being present. This is a great option for those who want to save time and simplify their lives.

A ghost immobiliser, a new generation device, connects to the CAN data network of your vehicle and utilizes buttons on the dashboard as well as the steering wheel to create a PIN code. It is designed to be discrete and has no LED indicator or noise to make it obvious and can be placed anywhere on the vehicle without affecting the appearance of your beloved vehicle.

This stealthy system is approved by TASSA and can reduce your insurance costs. It has a tracking feature that can locate your vehicle, even if it's been stolen. This is useful if you have a costly or rare vehicle that you've invested lots of time personalising.

Autowatch Ghost, in conjunction with the iPhone application allows you to remotely start your vehicle if you have forgotten your PIN number or are not able to enter your vehicle. This feature is great if you have to do some errands, or drop off your kids but don't want to risk having someone else drive your vehicle. It's also useful when you have to take your vehicle to a mechanic for maintenance or repair.

The Ghost has the advantage that it does not transmit or detect radio frequency which means it's not detected by thieves using RF scanning and code grabbing technology. It is also able to protect your car from key copying and ECU swapping which are the most the most common methods used to steal cars.

No key cloning

ghost immobiliser and tracker immobilisers can be a great way to protect top-end vehicles and stop key copying. They stop your car from starting until an additional PIN code is entered in conjunction with the standard key fob. This makes it very difficult for thieves to steal your vehicle, and can deter them from attempting. This is an especially good idea if you have invested a lot of time and money personalising your vehicle, or own a rare or expensive model.

These immobilisers are connected to the vehicle's onboard CAN data network and are completely hidden, meaning that there is no visible sign of its presence within the vehicle. It is also difficult to detect using radio frequency scanning technology or code grabbing. This means a thief would need to wait longer to take your vehicle.

To get around the system, thieves must know the unique pin code and the location of the Ghost. The pin code is specific to you and may be changed as many times as you like. The pin code you choose is easy to remember, but mathematically difficult for anyone else to understand. Additionally the engineer will have provided you with a backup PIN code to override if you ever forget the pin.

The Ghost CAN Bus immobiliser can be easily installed anywhere on your vehicle. It is compatible with all vehicles and is fully customisable to match the look of your vehicle. It is also extremely affordable and easy to use. You can even transfer the device to another vehicle if you switch cars during the lifetime of ownership, as long as the new vehicle is compatible with the.

The CAN bus can be used with other security features. It is able to, for instance detect damage to the vehicle and notify the owner. It also can stop the engine in the event that the car is tampered with. The system will safeguard your vehicle against hacking and key duplication. It can also detect vibrations and contact with the vehicle. It can also alert the owner if the vehicle is moved.

No OBD port hacking

Ghost uses a hidden immobiliser module connected to your vehicle's CAN data network that prevents thieves from gaining access to your vehicle to disable the alarm, or deactivate the key fob and code new keys. This technology is an enormous improvement on traditional methods employed by thieves in the past to take your vehicle. The CAN data network also means that the system will not be affected by disconnecting or replacing your battery.

The Autowatch Ghost, the first non-detectable CAN bus immobiliser aftermarket in the world, guards against key-cloning, hacking, and replica car theft. It works without LED indications or key fobs, instead leveraging the buttons in your steering wheel or centre console, as well as the door panels to let you create a unique PIN code sequence (up to 20 button presses) which must be entered before you can drive your car away.

Modern thieves use diagnostics to identify circuit cuts on your vehicle. They can bypass immobilisers that require a large amount of wiring or are built into the wiring. The audi rs6 ghost installer is weatherproof, doesn't need any additional wiring and isn't detected by professional diagnostic tools. It can be used on vehicles equipped with anti-theft systems.

A Ghost immobiliser has another major benefit: your car can only be started by someone who knows your PIN and physically has access to your vehicle. This is a major advantage over traditional security systems which can be bypassed by simple modification of cables or a screwdriver.

You can easily reset your PIN if forget it by using the emergency PIN override feature of mobile phones or computers. This is helpful if you want to start your vehicle after leaving it in a garage or by using a valet parking service.

The Autowatch Ghost 2 has been accepted for insurance by TASSA and is able to be installed by our authorised installers. It features an RFID fingerprint system that can identify individual parts, which allows for the return of stolen items if they are discovered. It can also be turned into a service mode' which permits the engine to be started when your vehicle is in a garage, or with valet parking, however, you must enter your PIN again to exit the car.